Cisco IE 4000 Hardware Installation Manual page 52

Configuring the Switch with the CLI-Based Setup Program
Accessing the CLI Through the Console Port
c. Choose Start > Control Panel > Systems.
d. Click the Hardware tab and choose Device Manager. Expand the Ports section. The assigned COM port appears
in parenthesis at the end of the line with this entry: Cisco USB System Management Console.
4. Start the terminal-emulation program on the PC or the terminal. The program, frequently a PC application such as
HyperTerminal or ProcommPlus, makes communication possible between the switch and your PC or terminal.
5. Configure the COM port.
6. Configure the baud rate and character format of the PC or terminal to match the console port characteristics:

9600 baud

8 data bits

1 stop bit

No parity

None (flow control)
7. Connect power to the switch as described in
8. The PC or terminal displays the bootloader sequence. Press Enter to display the setup prompt. Follow the steps in
the Completing the Setup Program, page
Installing the Cisco Microsoft Windows XP, 2000, Vista, 7, 8, and 10 USB
Device Driver
A USB device driver must be installed the first time a Microsoft Windows-based PC is connected to the USB console
port on the switch. Use this procedure to install the USB driver on Windows XP, Windows 2000, Windows Vista,
Windows 7, Windows 8, and Windows 10.
1. Obtain the file Cisco_usbconsole_driver_3_1.zip from the Cisco.com website
https://software.cisco.com/download/release.html?mdfid=282979369&softwareid=282855122&release=3.1
The file details are as follows:
— Description: Cisco_usbconsole_driver_3_1.zip
— Release: 3.1
— Release Date: 27/Nov/2014
— File Name: Cisco_usbconsole_driver_3_1.zip
— Size: 14.35 MB (15045453 bytes)
— MD5 Checksum: eff2e955edcdc70209e6f9c8f6bd59cd
2. Unzip the file and install the corresponding exe file.
3. Navigate to the Device Manager window by performing a search in WIndows for Device Manager and opening it.
4. Connect the USB cable from the Windows PC to the Cisco switch.
5. From the Device Manager page, expand Ports (COM & LPT). Select USB Serial Port. Right-click and select Update
Driver Software ...
Connecting to Power, page
50.
48
18.