Honeywell Satellite XT Manual To Operations page 46

R E L A Y S
R E L A Y S T A T E
s e l e c t :
R E L A Y S T A T E
A L A RM 1 R E L A Y
s e l e c t :
R E L A Y S T A T E
A L A RM 2 R E L A Y
s e l e c t :
R E L A Y S T A T E
F A U L T R E L A Y
s e l e c t :
R E L A Y S T A T E
A L A RM 1 R E L A Y
s e l e c t : 1
A L A R M 1 R E L A Y
D E E N E RG I Z E D / NO
s e l e c t :
A L A R M 1 R E L A Y
E N E RG I Z E D / N C
s e l e c t :
Satellite XT R Version
1 o f 3
1 o f 3
2 o f 3
3 o f 3
o f 3
1 o f 2
2 o f 2
Configuration - Section 6
Used to individually define the Alarm 1, Alarm 2, and
Fault Relay to be either deenergized (normally open
contact) or energized (normally closed contact).
Ex factory the relays are deenergized (normally open
contacts).
Use the <set> key to enter.
Allows to set the Alarm 1 Relay state.
Allows to set the Alarm 2 Relay state.
Allows to set the Fault Relay state.
Allows the user to set the Alarm 1 Relay state.
Use the <set> key to enter.
The instrument will show the actual setting.
Defines the Alarm 1 Relay to be deenergized
(normally open contact).
Press the cursor keys <up> or <down> to change.
Press the <set> key to confirm or <esc> to exit.
Defines the Alarm 1 Relay to be energized (normally
closed contact).
Press the cursor keys <up> or <down> to change.
Press the <set> key to confirm or <esc> to exit.
Relay State
Alarm 1 Relay
Alarm 2 Relay
Fault Relay
Alarm 1 Relay
Deenergized / NO
Energized / NC
6-13