Honeywell Satellite XT Manual To Operations page 27

M A I N T E N A N C E
S E N S OR I N F O S
s e l e c t : 5
S E N S O R I N F O S
P A R T N UMB E R
s e l e c t :
P A R T N U M B E R
9 6 0 2 - 6 0 0 0
< e s c > t o e x i t
S E N S O R I N F O S
S E R I A L N UMB E R
s e l e c t :
S E R I A L N U M B E R
3 1
< e s c > t o e x i t
S E N S O R I N F O S
1 s t C A L I B R A T I ON
s e l e c t :
1 s t C A L I B R A T I O N
2 7 . 0 9 . 2 0 0 6
< e s c > t o e x i t
continued
Continued
Satellite XT R Version
Provides specific information about the sensor
presently installed, i.e. part number, serial number,
date of first calibration, sensitivity, and revision number.
o f 7
These data are stored in the sensor's memory. Actuate
the <set> key to select or use the cursor keys <up>
and <down> to continue in the menu.
Actuate the <set> key to display the part number of the
sensor presently installed.
1 o f 5
Use this information to order replacement sensors.
Additional order information is provided in Section 8,
Sensor Order Information. Actuate <esc> to leave.
!
Actuate the <set> key to display the serial number of
the sensor presently installed.
2 o f 5
This information may be required for service purposes.
Actuate the <esc> key to leave.
!
Use the <set> key to display the date when the
installed sensor was calibrated for the first time.
3 o f 5
This information may be required for service purposes
and to check the age of the sensor. Actuate <esc> to
leave.
!
Maintenance - Section 4
Sensor Infos
Part number
<Actual Sensor Part Number>
Serial Number
<Actual Sensor Serial Number>
First Calibration
<Date of First Calibration>
4-6