Honeywell Satellite XT Manual To Operations page 42

C O N F I G U R A T I O N
A U T O S E L F T E S T
s e l e c t : 4
A U T O S E L F T E S T
D I S A B L E D
s e l e c t :
A U T O S E L F T E S T
E N A B L E D
s e l e c t :
C O N F I G U R A T I O N
S E C U R I T Y
s e l e c t : 5
S E C U R I T Y
P A S SWOR D ON
s e l e c t :
S E C U R I T Y
P A S SWOR D O F F
s e l e c t :
Satellite XT R Version
The instrument's self-diagnostics provides an on-line
preventive sensor selftest performed automatically
every 24 hours, which may be enabled or disabled.
o f 1 0
Default setting is enabled.
Use the <set> key to enter. The display will show the
actual setting.
!The Auto Selftest function is not applicable for
Oxygen sensors.
Allows the user to turn off the Auto Selftest.
Press the cursor keys <up> or <down> to change.
Press the <set> key to confirm or <esc> to exit.
1 o f 2
Allows the user to turn on the Auto Selftest.
Press the cursor keys <up> or <down> to change.
Press the <set> key to confirm or <esc> to exit.
2 o f 2
Exiting the Monitoring Mode and entering the
Maintenance Mode, may be password protected, to
prevent the instrument from manipulations
by unauthorized personnel.
o f 1 0
Ex factory the password protection is disabled.
Use the <set> key to enter. The instruments shows the
actual setting.
Allows the user to enable the password protection.
Press the cursor keys <up> or <down> to change.
Press the <set> key to confirm or <esc> to exit.
1 o f 2
Allows the user to disable the password protection.
Press the cursor keys <up> or <down> to change.
Press the <set> key to confirm or <esc> to exit..
2 o f 2
Configuration - Section 6
Auto Selftest
Disabled
Enabled
Security
Password On
Password Off
6-9