Table of Contents
Advertisement
A L A R M 1
A L A RM 1 S T A T E
s e l e c t :
1
A L A R M 1 S T A T E
D I S A B L E D
s e l e c t :
A L A R M 1 S T A T E
E N A B L E D
s e l e c t :
A L A R M 1
A L A RM 1 L E V E L
s e l e c t :
2
A L A R M 1
L E V E L
0 . 0 5 p p m
p l e a s e e n t e r
Satellite XT R Version
Used to enable / disable the Alarm 1 activation. Default
setting is enabled. Use the <set> key to enter.
The instrument will show the actual setting.
o f
4
Allows the user to turn off the Alarm 1 activation. Press
the cursor keys <up> or <down> to change. Press the
<set> key to confirm or <esc> to exit.
1
o f
2
Allows the user to turn on the Alarm 1 activation. Press
the cursor keys <up> or <down> to change. Press the
<set> key to confirm or <esc> to exit.
2
o f
2
Used to set individual alarm levels for Alarm 1
activation. Default setting is 1 x TLV (Threshold Limit
Value) for the target gas. Press the <set> key to enter
o f
4
and show the actual setting.
To change the value, use the cursor keys <left> or
<right> to reach the desired position. Use the cursor
keys <up> and <down> to select the figures you wish to
enter. After the new value has been entered, press the
!
<set> key to confirm or <esc> to exit.
Configuration - Section 6
Alarm 1 State
Disabled
Enabled
Alarm 1 Level
<Actual Alarm 1 Level>
6-5
Hide quick links:
Advertisement
Table of Contents
