Motor Control (Assigning Control Priority) - Siemens SIRIUS 3RW44 User Manual

5.5.3 Motor Control (Assigning Control Priority)

SIEMENS
3RW44
Menu
ESC OK
Display mea- 1
sured value
select select
ESC OK
Status 2
display
select
ESC OK
3
Settings
select
ESC OK
4
Motor
control
select
ESC OK
1
Motor control
via keys
select
ESC OK
2
Control motor
via inputs
select
ESC OK
3
Standard
control
Inputs
change
ESC OK
Figure 5-34:Motor control
SIRIUS 3RW44 manual
GWA 4NEB 535 2195-02 DS 06
Notice
The "Standard control" menu item specifies which control device should be given
control priority when the control supply voltage is applied.
When the PROFIBUS communication module is activated, the setting is changed to
"Automatic/None".
Control device priority
Only a higher-priority control device can assume and hand over the control
priority (0 = lowest).
- 0: Automatic operation (input control through PLC via PROFIBUS)
- 1: PC via PROFIBUS (Soft Starter ES software required)
- 2: Inputs
- 3: Via display keys
- 4: PC via serial interface (Soft Starter ES software required)
Possible values
Activate key control?
Deactivate key control?
Execute control function
Activate control via inputs?
Deactivate control via inputs?
Automatic / None
Inputs
Keys
Commissioning
5-43