Activating The Field Bus Interface (Profibus Dp); Saving Options - Siemens SIRIUS 3RW44 User Manual

Commissioning

5.4.13 Activating the Field Bus Interface (PROFIBUS DP)

5-36
For information on activating the field bus interface, please refer to Chapter 8.4
"Activating the PROFIBUS DP Communication Module (Field Bus Interface) and
Setting the Station Address".
SIEMENS
3RW44
Menu
ESC OK
Display mea-
1
sured value
select select
ESC OK
Status
2
display
select select
ESC OK
Settings
3
select select
ESC OK
Parameter
set 1
ESC
Saving
options
ESC
Fieldbus
ESC
Notice
If the parameter "Parameters disabled CPU/Master" is set to "Off" (factory setting), the
parameters set on the soft starter will be overwritten with the values stored in the GSD file
or in the OM when the bus is started. If this is not desired, the parameter must be set to
"On".
1
select select
OK
11
select select
OK
10
select select
OK
Fieldbus
1
interface
On
select change
ESC OK
Group diagnosis
2
Disable
select change
ESC OK
Response to
3
CPU master stop
Substitute value
change
ESC OK
Station address
4
126
select change
ESC OK
Baud rate
5
12,000 kBd
ESC OK
Substitute value
6
select select
ESC OK
Parameters disabled 7
CPU/Master
Off
select change
ESC OK
SIRIUS 3RW44 manual
GWA 4NEB 535 2195-02 DS 06