Table of Contents
Advertisement
EXCELL PRECISION CO., LTD.
the procedures, the net indication
Place goods into the container, then the indicator shows the net weight of goods.
Clear pretare value
Press
When the indicator returns to zero, net indication (Net) and pretare indication " "
are off.
Recall pretare value
Press
In Tare mode, the Preset tare function is disabled.
The indicators with two weighing ranges can NOT pre-set the tare value larger than the
first weighing range. For example: a 30 kg indicator is set by two weighing ranges. The
first range is 0 to 15 kg, and the second range is 15 to 30 kg. The pre-set tare value can
not be larger than 15 kg.
2-3 Counting Function
2-3-1 Sampling
Press
shows
,
Select sample quantity and then place samples on the platter, and then press
key, the display shows "
After stable, the scale enters into counting mode and the display shows sample
quantity.
♦ Sample Too Small (
♦ Unit Weight Too Small (
When sampling, the above two symbols indications are on. Under such conditions,
the scale can still work, but may result in lower count precision.
When using 2-segment weighing mode, the above two symbol indications change to
Range 2 and Range 1 and the two symbol indications are off.
2-3-2 Check Weighing
Refer to the operation of check weighing in weighing function.
2-3-3 Totalizing
Refer to the operation of totalizing in weighing function.
02018058
then
key, and then press
key ⇒ the display shows pretare value
then
key to select sample quantity from 10, 20, 50,100 and the display
,
,
.
⇒ Sample is less than 20 divisions.
)
. .
. . .
. . . .
⇒ Unit weight is less than 0.2 division.
)
Pcs
and pretare indication " " is on.
(
)
Net
accordingly.
".
(0.1 d for Brazil regulation)
12
key to clear pretare value.
ZSME300000317
Advertisement
Table of Contents
