Table of Contents
Advertisement
EXCELL PRECISION CO., LTD.
Low Power Alarm
Please note when the (
display, the batteries should be recharged.
The scale will turn off automatically after a few hours when the low battery warning symbol
shows up. The scale must be fully recharged, before operating again.
Please recharge at once when the symbol
accuracy.
1-5 Error Messages
⇒ Weight exceeds 9d of maximum capacity. (d=division)
⇒ Zero value after power on is over +10% FS.
⇒ Zero value after power on is less than -10% FS.
⇒ Unstable zero return, unstable over 10 sec. Press
⇒ Zero is too high when calibrating. (over internal value350,000)
⇒ Zero is too low when calibrating. (under internal value 80,000)
- - - - - - ⇒ If the negative weight is over 20 divisions and there is no T or PT, the display
shows "- - - - - -"
02018058
) symbol keeps flashing on the left down corner of the
shows in order to keep the weight
7
to leave E4.
ZSME300000317
Advertisement
Table of Contents
