Keypad Description - Excell EX-2005C User Manual

EXCELL PRECISION CO., LTD

1-3 Keypad Description

Exit key when setting parameters or calibration mode
Generally, press this key to enter into or exit standby mode
Run
Enter into standby mode：all the indication (except HI indication
:
Stop
and data output is closed
Exit standby mode
Press this key to recall the memorized HI times, LO times, OK times
Qty
:
on the display
MR
:
MC
Press this key to clear all the memorized data
:
Press this key to set the check-weighing High limit and Low limit
Limit
Press this key to clear all the memorized times
Setting the qualified times of the indicator
F
:
Mode 0
Mode 1
: Press this key to confirm all the setting are saved
Enter
Press and hold
Switch on the indicator, press and hold
enter into calibration mode.
Switch on the indicator, press and hold
enter into function setting mode
When the indicator is switched on and counting down to zero, press
keys to restore all parameters to default value.
Enter
When the indicator is switched on and counting down to zero, press
keys to enter into testing mode.
Run
Stop
EX-2005C
：restart the indicator
: when reaching the qualified time, the signal 4 will be activated
and output
: when reaching the qualified time, the operation process stops
key and then press
Enter
.
MC
key to rezero the indicator
key and then press
Enter
key and then press
Enter
5
"3")
Limit
key to
F
key to
and
Enter
and
Enter
ZSME300000116