Push-To-Talk (Ptt); Turn Ptt On Or Off - AT&T CL82107 User Manual

Multiple handset use

Push-to-talk (PTT)

You can directly broadcast messages to the speakerphone of any
device. Press and hold PUSH TO TALK on a handset to begin
two-way communication.
Only one device can talk at a time. To do so,
f f
press and hold PUSH TO TALK.
You must release PUSH TO TALK, so the other
f f
person can respond.
Only one PTT session can be active at a time.
f f
While PTT is in use between two devices, other
f f
devices cannot use the intercom feature but can access the
answering system.
When you attempt to place a PTT call to another device which is
f f
accessing the answering system or on an intercom call or outside
call, your device screen shows Not available at this time.
Note: The PTT function is not available when QUIET mode is on or if you have only one
handset.

Turn PTT on or off

1. Press PUSH TO TALK when the handset is not in use. The
PUSH TO TALK menu displays.
2. Press q
CID
/SELECT.
MENU
3. Press q
CID
press
MENU
Note: The handset screen displays No Incoming PTT when PTT is turned
off.
to highlight PTT On/Off, then press
or p
DIR
or p to choose On or Off, then
DIR
/SELECT.
41
PTT
PUSH TO TALK
>PTT On/Off
fffff