Call Screening - AT&T CL82107 User Manual

Answering system
Answering system settings

Call screening

Use this feature to choose whether incoming messages can be
heard over the speaker when they are being recorded. If you
turn call screening on, you hear the incoming message. While
monitoring an incoming message, you can answer the call by
pressing
To change the setting:
1. When the handset is in idle mode, press
MENU/
SELECT
2. Press q
CID
then press
3. Press q
CID
then press
4. Press
MENU
5. Press q
CID
6. Press
MENU
a confirmation tone.
Note: For more information on call screening, see page 115.
on the handset.
to enter the main menu.
to scroll to Answering sys,
or p
DIR
/SELECT.
MENU
to scroll to Ans sys setup,
or p
DIR
/SELECT.
MENU
/SELECT to select Call screening.
to choose On or Off.
or p
DIR
/SELECT to save the setting. You hear
107
Voice guide
>Ans sys setup
Call screening
>
# of rings
CALL SCREENING
>On
fffff