Blind Transfer - AT&T CL82107 User Manual

Telephone operation
Options while on calls

Blind transfer

While on an outside call, you can transfer the call to a specific
device or any device without notifying them.
To transfer an outside call directly without
notifying the desired device:
1. During the call, press MENU/
2. Press
q
CID
press
MENU
If you have a two-handset system and no other
f f
registered devices, the outside call is put onhold
and your handset shows Transferring call....
The other handset rings and shows Transfer
from other handset.
If you have other registered device(s) or
f f
more than two handsets, your screen shows
TRANSFER TO:. Use the dialing keys to enter
a specific device number (1-9 for handsets 1-9,
TONE followed by 0-2 for handsets 10-12, or
TONE followed by # for all devices), or press q
scroll to the desired device and press
/SELECT. The outside call is put on hold and your
MENU
handset screen shows Transferring call... or Transferring
call to all.... The other device rings and shows Transfer from
HANDSET X (HANDSET represents the handset name, X
represents the handset number).
3. To answer the call on the destination handset, press
#). The initiating handset shows Call transferred and goes to
idle mode.
Notes:
To cancel the transfer and return to the external call before the blind transfer call is answered,
f f
press
If the other device does not answer the transfer within 30 seconds, the transfer ends and the
f f
initiating device rings while showing No response to transfer. If it does not pick up within 30
seconds, the device returns to idle mode and the outside call ends.
or p to scroll to
DIR
/SELECT.
/SPEAKER, or any dialing key (0-9, TONE or
,
,
.
SELECT
Transfer
and then
or /SPEAKER on your handset.
36
Phone 0:00:12
6:30 8/06
AM
>Equalizer
Transfer
TRANSFER TO:
>Handset 2
or p to
CID DIR