Smart call blocker
Call block settings
Set Smart call blocker on/off
The Smart call blocker feature is set to on by
default.
1. Press CALL BLOCK on the handset when it is
not in use, and then press
select SCB On/Off.
-OR-
Press MENU/
when the handset is not in use. Press q
to scroll to Smart call blk, then press
p
DIR
/SELECT twice.
MENU
2. Press q
CID
press
MENU
hear a confirmation tone.
Control calls without numbers
Use this setting to control "out of area" or "Private" calls. You can
choose to allow or reject these calls directly. You can also choose to
screen them with or without learning the callers' names before you
decide whether to answer or reject these calls. Moreover, you can
forward these calls to the answering system.
To change the setting:
1. Press CALL BLOCK on the handset when it is not in use.
-OR-
Press MENU/
when the handset is not in use. Press q
to scroll to Smart call blk, then press
p
DIR
/SELECT.
MENU
to enter the main menu
SELECT
to highlight On or Off, then
or p
DIR
/SELECT to save the setting. You
to enter the main menu
SELECT
/SELECT to
MENU
72
or
CID
Answering sys
>Smart call blk
fffff
>SCB On/Off
Block list
fffff
Answering sys
>Smart call blk
or
CID
fffff