Temporary Tone Dialing; Blind Transfer - AT&T CL82311 Complete User's Manual

Telephone operation
Options while on calls

Temporary tone dialing

If you have pulse (rotary) service only, you can switch from pulse to
touch-tone dialing temporarily during a call. This is useful if you need to
send touch-tone signals to access your telephone banking or long
distance services.
1. During a call, press TONE .
2. Use the dialing keys to enter the desired number. The telephone sends
touch-tone signals.
3. The telephone automatically returns to pulse dialing after you end the call.

Blind transfer

While on an outside call, you can transfer it
handset.
To transfer an outside call directly without notifying the desired handset:
1. During the call, press MENU/
2. Press /SELECT to choose >Transfer.
MENU
• If you have a 2-handset system, the outside call is put on
hold and your handset screen shows Transferring call...
The other handset rings and its screen shows Transfer
from other handset.
• If you have more than 2 handsets, your screen shows
TRANSFER TO: Use the dialing keys to e e nter a specific
handset number (1-9 for handsets 1-9,
for handsets 10-12, or TONE and # for all handsets),
q
press
CID
and press
and your handset screen shows Transferring call... or
Transferring call to all...
The other handset(s) rings and shows Transfer from
HANDSET X
handset number).
3. To answer the call on the destination handset, press
/SPEA�ER SPEA�ER. The original handset shows Call transferred and goes to
idle mode.
NOTES:
• To cancel the transfer and return to the external call before the blind transfer call is answered,
press /CANCEL on your handset.
OFF
• If the other handset does not answer the transfer within 30 seconds, the transfer ends and the
original handset rings while showing No response to transfer. If it does not pick up within 30
seconds, the handset returns to idle mode and the outside call ends.
or p
to scroll to the desired handset
DIR
/SELECT.
The outside call is put on hold
MENU
(HANDSET represents the handset name, X represents the
to a specific handset or any
.
SELECT
TONE and 0-2
, press PHONE/
24
Phone 0:00:12
10/15 10:01
>Transfer
Intercom
p
q
or
TRANSFER TO:
>Handset 2
p
q
or
FLASH
AM