Safety Notes; The Manual - Siemens Milltronics BW100 Instruction Manual

Safety Notes

Special attention must be paid to warnings and notes highlighted from the rest of the text
by grey boxes.
WARNING means that failure to observe the necessary precautions
can result in death, serious injury, and/or considerable material
damage.
Note:
means important information about the product or that part of the operating
manual.

The Manual

It is essential to refer to thismanual for proper installation and operation of your BW100
belt scale integrator. As the BW100 must be connected to a belt scale, and optionally a
speed sensor, refer to their manuals as well.
The manual is designed to help you get the most out of your BW100, and it provides
information on the following
• How to install the unit
• How to program the unit
• How to operate the keypad
and read the display
• How to do an initial Start Up
• How to optimize and
maintain accurate operation
of the unit
Note: The Milltronics BW100 is to be used only in the manner outlined in this
instruction manual.
If you have any questions, comments, or suggestions about the manual contents, please
email us at techpubs@siemens-milltronics.com.
For the complete library of Siemens Milltronics manuals,
go to www.siemens-milltronics.com.
Page 2 Milltronics BW100 - INSTRUCTION MANUAL
• Outline diagrams
• Wiring diagrams
• Parameter values
• Parameter uses
• Modbus register mapping
• Modem configuration
7ML19985DJ01