Introduction; Safety Notes; Product Warnings - Siemens Milltronics MD-36 Instruction Manual

Introduction

Safety Notes

Special attention must be paid to warnings and notes highlighted from the rest of the text
by grey boxes.
WARNING: means that failure to observe the necessary
precautions can result in death, serious injury, and/or
considerable material damage.
CAUTION: means that failure to observe the necessary precautions can
result in considerable material damage.
Note:
means important information about the product or that part of the operating
manual.
Safety marking symbols

Product Warnings

WARNINGS:
♦
Repair of this equipment shall be carried out by suitably trained
personnel in accordance with the applicable Codes of Practice.
♦
If the equipment is likely to come into contact with aggressive
substances, then it is the responsibility of the user to use suitable
precautions that prevent it from being adversely affected.
♦
The MD–36 Speed Sensors are to be used only in the manner outlined
in this manual or protection provided to the equipment may be
impaired.
7ML19985DB01 Milltronics MD-36 Speed Sensor – INSTRUCTION MANUAL
Alternating Current
Direct Current
Earth (ground) Terminal
Protective Conductor Terminal
Page 3