Start Up; Orientation; Display And Keypad - Siemens Milltronics BW100 Instruction Manual

Start Up

Note:
For successful start up, ensure that all related system components such as
belt scale and speed sensor are properly installed and connected.

Orientation

Display and Keypad

LCD
Keypad
The BW100 operates under two modes: RUN and PROGRAM. When the unit is initially
powered, it starts in the PROGRAM mode.
If the PROGRAM mode is idle, it reverts to the run mode after 10 minutes.
7ML19985DJ01 Milltronics BW100 - INSTRUCTION MANUAL
1 2 3
balance switch, SW2
balance potentiometer, P1
Page 17