Span Calibration - Siemens Milltronics BW100 Instruction Manual

Span Calibration

Run the conveyor until the belt is empty and stop it. Suspend the test weight from the
scale per its instruction manual. Run the conveyor belt empty.
Remove the test weight when the Span calibration is complete.
7ML19985DJ01 Milltronics BW100 - INSTRUCTION MANUAL
1 2
1 2
1 2
1 2
1 2
initial span count
span calculation,
frequency count
displayed
span deviation
calculated
initial deviation = 0
span deviation accepted
initial span count = ####
Record this value for
future reference
successful entry
into run,
display rate
Page 27