Waypoint Switching Mode; Route Auto Zoom - Furuno TZT9 Operator's Manual

5.9.5

Waypoint switching mode

When you arrive to a route point, your unit automatically changes to the next route
point according to the waypoint switching mode selected on the menu.
[Cross Line]: Change the waypoint when the ship moves through an imaginary cross
line (vertical line) that passes through the center of the destination point.
[Circle]: Change the waypoint when the ship comes within the circle.
[Circle and Cross Line]: Change the waypoint when one of the above two conditions
is met.
A red dashed circle appears when you select [Circle and Cross Line] or [Circle].
Cross line
[Circle and Cross Line]
1. Select [Menu] on the menu icon bar to open the main menu.
2. Select the [Routes] - [Waypoint Switching Mode] menu.
3. Select [Circle and Cross Line], [Circle] or [Cross Line]. For [Circle and Cross Line]
or [Circle], go to the next step. For [Cross Line], go to step 6.
4. Select [Switching Circle Radius] to display the software keyboard.
5. Set the arrival area (circle radius) then [Confirm].
6. Select [Close] to exit the menu.
5.9.6

Route auto zoom

You can get automatic range change after you have moved past the go to point. Use
this feature to find the next go to point in the route when the next go to point is not
within the current display range.
1. Select [Menu] on the menu icon bar to open the main menu.
2. Select the [Routes].
3. Select the [ON] icon in [Route Auto Zoom] to activate the route auto zoom, or the
[OFF] icon to deactivate the route auto zoom.
4. Select [Close] to exit the menu.
Arrival area
The value for the circle
radius is set in [Switching
Circle Radius].
Waypoint Switching Mode
[Circle]
Circle and Cross Line
Circle and Cross Line
Circle
Cross Line
5. ROUTES
Cross line
[Cross Line]
5-13