Drive Unit; Preparation For Removing The Drive Belt; Removing The Drive Belt - Canon LBP6000 Series Service Manual

[2]
[3]
Be sure to place the springs [1] between [A] and [B] parts of the Pickup Tray
Unit when assembling.
[A]
[1]
[B]
When installing the Pickup Tray Unit to the machine, be sure to put the
Pickup Tray [2] onto the Pickup Roller [1].

3.1.8 Drive Unit

3.1.8.1 Preparation for Removing the Drive Belt

LBP3100 / LBP3010B
1) Removing the Upper Cover (page 3-3)Reference[Removing the Upper
Cover]
2) Removing the Left Cover (page 3-2)Reference[Removing the Left Cov-
er]
3) Removing the Right Cover (page 3-2)Reference[Removing the Right
Cover]
[1]
F-3-19
[A]
[1]
[B]
[1]
[2]
4) Removing the Front Cover (page 3-6)Reference[Removing the Front
Cover]

3.1.8.2 Removing the Drive Belt

LBP3100 / LBP3010B
1) Remove the tension unit [1].
- 1 screw [2]
2) Remove the drive cover [1].
- 4 screws [2]
Points to note at disassembly
When removing the 4 screws [1], hold the driver cover [2] by hand.
(Otherwise, the spring [3] inside the drive cover may be lost.)
3) Remove the 2 gears [1].
0019-2622
[1] [2]
F-3-20
[1]
[2] [1]
[2]
F-3-21
Chapter 3
0019-2623
[3]
[1]
[2]
[2]
3-9