Before Removing The Fixing Assembly; Removing The Fixing Assembly - Canon LBP6000 Series Service Manual

Chapter 3
Points to note at installation
When attaching the fixing harness, wind the fixing harness [2] around the
protrusion [1] of the harness holder and secure it with the harness guide [3].
[3]
Points to note at installation
When attaching the terminal [1], make sure that the contact spring [2]
contacts as shown.
[1]
[2]

3.5.1.3 Before Removing the Fixing Assembly

LBP6000 / LBP6000B
3-36
[1] [2]
1) Remove the Upper Cover. (page 3-5)Reference[Removing the Upper
Cover]
2) Remove the Left Cover. (page 3-3)Reference[Removing the Left Cov-
er]
3) Remove the Right Cover. (page 3-2)Reference[Removing the Right
Cover]
4) Remove the Rear Cover. (page 3-1)Reference[Removing the Rear Cov-
er]
5) Remove the Main Controller PCB. (page 3-17)Reference[Removing the
Main Controller PCB]

3.5.1.4 Removing the Fixing Assembly

LBP6000 / LBP6000B
1) Remove the terminal [1], and free the harness [3] from the Harness Guide
[2].
[1]
2) Disconnect the 4 connectors [1].
3) Free the harness [3] from the Harness Guide [2].
4) Free the Fixing Harness [5] from the Harness Holder [4].
5) Remove the Harness Holder [1].
- 1 Claw [2]
0025-1247
[2] [3]
F-3-115
[3]
[2]
[4] [5]
[1]
[1]
F-3-116
0025-1248