Before Removing The Memory Contact Unit; Removing The Memory Contact Unit - Canon LBP6000 Series Service Manual

Chapter 3
Points to note at installation
When attaching the laser scanner cover [1], put the shutter lever [2] through
the hole [3] on the scanner cover.
[2]

3.1.12.3 Before Removing the Memory Contact Unit

LBP6000 / LBP6000B
1) Remove the Upper Cover. (page 3-5)Reference[Removing the Upper
Cover]
2) Remove the Left Cover. (page 3-3)Reference[Removing the Left Cov-
er]
3) Remove the Right Cover. (page 3-2)Reference[Removing the Right
Cover]
4) Remove the Front Cover. (page 3-6)Reference[Removing the Front
Cover]
5) Remove the Rear Cover. (page 3-1)Reference[Removing the Rear Cov-
er]
6) Remove the Separation Pad. (page 3-34)Reference[Removing the Sep-
aration Pad]
7) Remove the Pickup Tray Unit. (page 3-8)Reference[Removing the
Pickup Tray Unit]

3.1.12.4 Removing the Memory Contact Unit

LBP6000 / LBP6000B
1) Remove the Scanner Sub Cover [1].
- 1 Screw [2]
2) Remove the Scanner Cover [1].
- 3 Screws [2]
3-20
[3] [1]
[1] [2]
F-3-64
[2]
3) Disconnect the connector [1] and take it out from the hole [2] on the Side
Plate.
0025-1229
0025-1230
4) Disconnect the harness [1] and take it out from the hole [2] on the guide.
[1]
[2]
5) Turn the machine [1] in the direction of the arrow.
[1]
F-3-65
[2]
[1]
F-3-66
F-3-67
[1]
F-3-68
[2]