Table of Contents
Advertisement
Chapter 3
[3]
3.1.12 Relay Board
3.1.12.1 Preparation for Removing the Memory Contact
Unit
LBP3100 / LBP3010B
1) Removing the Upper Cover (page 3-3)Reference[Removing the Upper
Cover]
2) Removing the Left Cover (page 3-2)Reference[Removing the Left Cov-
er]
3) Removing the Right Cover (page 3-2)Reference[Removing the Right
Cover]
4) Removing the Front Cover (page 3-6)Reference[Removing the Front
Cover]
5) Removing the Rear Cover (page 3-1)Reference[Removing the Rear
Cover]
6) Removing the Separation Pad (page 3-34)Reference[Removing the Sep-
aration Pad]
7) Removing the Pickup Tray Unit (page 3-7)Reference[Removing the
Pickup Tray Unit]
3.1.12.2 Removing the Memory Contact Unit
LBP3100 / LBP3010B
1) Remove the scanner sub cover [1].
- 1 screw [2]
2) Remove the scanner cover [1].
- 3 screws [2]
3-18
[1]
[2]
F-3-53
[1]
[2]
F-3-54
[2]
3) Disconnect the connecter [1] and put the connecter [1] through the hole
[2] on the side plate [2].
0019-4853
4) Remove the harness [1] and take the harness [1] out from the guide hole
[2].
0019-4854
[1]
[2]
5) Turn the host machine [1] in the direction of the arrow.
[2]
[1]
F-3-55
[2]
[1]
F-3-56
F-3-57
Advertisement
Table of Contents
