Canon LBP6000 Series Service Manual page 108

Chapter 3
[1]
2) Remove the terminal [1], and free the harness [3] from the Harness Guide
[2].
[2]
[1]
3) Disconnect the 4 connectors [1].
4) Free the harness [3] from the Harness Guide [2].
3-30
[1]
F-3-97
[3]
F-3-98
5) Remove the Pickup Unit [1].
- 6 Screws [2]
[1]
[2] [2]
Points to Note at Installation
When installing the Pickup Unit [1], be sure to make the Contact Spring [2]
comes in contact with [A] part. Be sure to make the grounding contact point
[3] comes in contact with [B] part.
[1] [3]
Points to Note at Installation
When installing the terminal [1], be sure that the Contact Spring [2] is in
contact with it as shown below.
[3]
[2]
[1]
[1]
F-3-99
F-3-100
[2] [A] [B]