Before Removing The Main Motor; Removing The Main Motor - Canon LBP6000 Series Service Manual

[1]
[2]
[1]
6) Free the motor harness [2] from the harness guide [1].
7) Remove the motor guide [3].
- 1 screw [4]
[2]
[3]
8) Remove the main motor [1].
- 2 screws [2]
[2]
F-3-32
[1] [4] [3]
F-3-33
[1]
Points to note at installation
When attaching the laser scanner cover [1], put the shutter lever [2] through
the hole [3] on the scanner cover.
[2]

3.1.9.3 Before Removing the Main Motor

LBP6000 / LBP6000B
1) Remove the Upper Cover. (page 3-5)Reference[Removing the Upper
Cover]
2) Remove the Left Cover. (page 3-3)Reference[Removing the Left Cov-
er]
3) Remove the Right Cover. (page 3-2)Reference[Removing the Right
Cover]
4) Remove the Front Cover. (page 3-6)Reference[Removing the Front
Cover]

3.1.9.4 Removing the Main Motor

LBP6000 / LBP6000B
1) Remove the Scanner Sub Cover [1].
- 1 Screw [2]
2) Remove the Scanner Cover [1].
- 3 Screws [2]
Chapter 3
[2]
F-3-34
[3] [1]
[1] [2]
F-3-35
0025-1223
0025-1224
3-13