M.2 Wlan Module - HP ProDesk 600 G3 Maintenance And Service Manual

M.2 WLAN module

Description
Intel 8265 802.11AC 2x2 Wi-Fi +Bluetooth M.2 Combo Card non-VPro
Intel 7265 802.11AC 2x2 Wi-Fi +Bluetooth M.2 Combo Card non-VPro
Intel 3168 802.11AC 2x2 Wi-Fi +Bluetooth M.2 Combo Card non-VPro
The WLAN module is secured with one screw and has two connected antennas.
1. Prepare the computer for disassembly
2. Remove the access panel
3. Remove the drive cage
4. Disconnect the antenna cables from the module (1).
5. Remove the screw (2) that secures the module to the computer.
6. Lift the module upward (3), and then pull the module to remove it from the socket (4).
To install the WLAN module, reverse the removal procedure.
NOTE: WLAN modules are designed with a notch to prevent incorrect insertion.
48 Chapter 4 Removal and replacement procedures: Small Form Factor
(Preparation for disassembly on page
(Access panel on page
(Drive cage on page 25).
21).
20).