11.3 QR-coded Parameter Menu
Menu control (Starting/Ending the Setting Procedure and Reverting to Defaults)
Start setting
All defaults
The speaker volume can be set by scanning the following QR Code symbol only. No "Start setting" or "End
setting" QR Code symbol is required to be scanned.
Adjusting the speaker volume
Scanning this QR Code symbol cycles the speaker volume through High, Medium and Low. The factory default is
High.
This QR Code symbol applies only to the speaker beep. Adjusting the playback volume of audio data files requires
the same operation as for other parameters (see Section 11.1).
Cancel
Speaker volume
74
Start setting
(When the "White code on
black background" is set)"
End setting