Denso QK30-U User Manual page 58

Code 39
Code data read will be transmitted as is.
You can select whether or not to transmit start and stop codes ("*").
Interleaved 2of5/Standard 2of5
The scanner transmits code data read, starting from the character following the start code to the one preceding the stop
code. No start/stop codes will be transmitted.
Codabar (NW-7)
The scanner transmits code data read including the start/stop codes. You can select whether or not to transmit
start/stop codes.
C ode 128 (GS1-128)
The scan ner transmits code data read, starting from the character following the start code to the one preceding the
check digit. Start/stop codes, FNC codes, or check digit will not be transmitted. Note that FNC1 placed in
positions other than the 1st and 2nd ones from the start code will be converted to GS (1Dh) and transferred.
The conversion to the GTIN format is also selectable. For the GTIN format conversion, refer to Section 9.4.
Code 93
The scanner transmits code data read, excluding start and stop codes and a check digit.
GS1 DataBar
Code data read will be transm
T he conversion to the GT
(Note)
GS1 DataBar includes:
GS1 DataBar Omnidirectional(RSS-14),
GS1 DataBar Truncated(RSS-14 Truncated),
GS1 DataBar Limited(RSS Limited),
GS1 DataBar Expanded(RSS Expanded),
GS1 DataBar Stacked(RSS-14 Stacked),
GS1 DataBar Expa nded Stacked(RSS Expanded Stacked),
GS1 DataBar Stacked Omnidi
itted as is.
IN format is also selectable. For the GTIN format conversion, refer to Section 9.4.
rectional(RSS-14 Stacked Omnidirectional)
47
character