Denso QK30-U User Manual page 68

2d code scanner (fixed type)
Table of Contents

Advertisement

(5
) Data transmissio
n fo
Items
Transmission of code ID mark
Code ID mark position
Code ID mark
Code ID mark output mode
Transmission of the
numbe
(not applicable to UPC/EAN codes)
Prefix transmission
Suffix transmission
Scanner ID output
GTIN format conversion
Conversion type from EAN/UPC to GTIN
format
Conversion type from GTIN format to
EAN/UPC format
Prefix PI in conversion from EAN/UPC to
GTIN format
rmat common to all interfaces
Enable
Disabl
Before prefix
After prefix
Type 1 (DENSO1)
Type 2 (DENSO2)
Type 3
Type 4
User-defined
Coupling
Separating
Enable, in 4 digits
r of digits
Enable, in 2 digits
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Conversion to 16 digits
Conversion to 14 digits
Conversion prohibited
Conversion to 14 digits
Conversion to 13 digits
Conversion prohibited
0 to 9
Parameters
e
: Can be changed only with the configuration software.
57
Def
aults
Refer to:
Section 9.3
Section 9.3, (5)
Section 9.3, (6)
Section 9.3, (3)
Section 9.3, (2)
Section 9.4
0

Advertisement

Table of Contents
loading

Table of Contents