Denso QK30-U User Manual page 76

Code 128, GS1-128
Items
Reading Code 128
Reading GS1-128
Minimum number of readable digits for
Code 128
Maximum number of readable digits for
Code 128
Transmission of FNC1 for
Code 128
Minimum number of readable digits for
GS1-128
Maximum number of readable digits for
GS1-128
Transmission of FNC1 for GS1-128
(N ote 1) The setting ranges are different from the numbers of digits that the scanner can actually read.
(N ote 2) Using the QR-coded parameter menu enables or disables scanning of both Code 128 and GS1-128 at the same time.
Code 93
Items
Reading Code 93
Minimum number of readable digits for
Code 93
Maximum number of readable digits for
Code 93
( Note 1) The setting ranges are different f
Parameters
Enable
Disable
Enable
Disable
1 to 99 digits
(excluding start/stop codes and
1-digit check digit)
Disable
Transmit GS
User-defined
1 to 99 digits
(excluding start/stop codes and
1-digit check digit)
Disable
Transmit GS
User-defined
Parameters
Enable
Disable
1 to 99 digits
(excluding start/stop codes and
2-digit check digits)
rom th e numbers of dig its that the scanner can a
65
Defaults


1 digit
99 digits

1 digit
99 digits

: Can be changed only with the configuration software.
Defa ults

1 digit
99 digits
ctually re
: Can be change d only with
Refer to:
(See Note 2.)
(See Note 1.)
(See Note 1.)
Refer to:
(See Note 1.)
ad.
the configuration software.