LED DISPLAY CONSOLE INSTALLATION INSTRUCTIONS
Step 1.
Remove electronic display console from pack-
aging materials.
Note: If you are installing an iPod® Kit, a MYE Entertain-
ment kit or a Personal Viewing Screen kit along with this
display, it is recommended that you install the kit's center
console before you mount the display onto the frame.
Step 3.
Position the display assembly while a helper
makes necessary connections.
14
Step 2.
If the back display covers are attached to dis-
play console then remove and save them for
later use, otherwise proceed to the next step.
c
d
b
a
Step 4.
Identify the 7 cables coming our of the neck:
a. DC power cable.
b. Fan power cable.
c. Contact heart rate cable.
d. Coax cable.
e. Main I/O cable.
f. Rail stop cable.
g. E-Stop cable.
Note: If the unit is not equipped with a PVS kit or iPod®
kit, then the PVS power cable and coax cable should be
tucked down the neck for possible future use.
e
f
g
600-7919 Rev A