Step - Star Trac E-TR Work Instructions

Step 17.

Fasten the side bed covers (left and right) with
#10-24 x 3/4 Truss head screws.
Step 19.
Route the fan power cable (p/n 715-3678)
through the pre-installed cable tie saddles.
Note: Make sure the fan power cable is routed away
from all moving parts, including the RPM disk.
11
Step 18.
Route the main I/O cable (p/n 715-3781) under
the elevation cable and connect it to I/O inter-
face J2 Connector on the Motor Control Board.
Note: Make sure the main I/O cable is routed away
from all moving parts, including the flywheel.
Step 20.
Now connect fan power cable to fan power sup-
ply board.
600-7919 Rev A