Star Trac E-TR Work Instructions page 9

Step 13.
Tighten the 2 upper neck screws (5/16-18 x 3.0"
socket head) to a torque value of 240in-lbs (27
Nm).
Step 15.
Tighten handrail fasteners where handrails are
joined with treadmill frame. Use the following
torque specifications:
5/16-18 x 1.0" socket head screws- 240in-lbs
(27Nm).
10
Step 14.
Now tighten the 4 display rail fasteners (where
neck is joined with display rail) to a torque
value of 240in-lbs (27 Nm).
Step 16.
Make sure the side bed covers joins properly
to the end caps and that there is no gap be-
tween the two parts.
600-7919 Rev A