Flight Director Display; Vertical Speed Control - Garmin G500 Reference Manual

PRIMARY FLIGHT DISPLAY (PFD)

Flight Director Display

Flight director commands are presented as a single cue flight director on the
PFD.
SVT Off

Vertical Speed Control

The GDU 620 vertical speed bug may be used to control vertical speed with
certain autopilots. Refer to the Airplane Flight Manual and autopilot system
documentation for instructions on how to use the vertical speed mode, if available.
Adjust the vertical speed bug in the normal manner when using the vertical
speed mode interface. Some autopilot installations support engaging/disengaging
the vertical speed mode using the VS key on the PFD. The vertical speed mode
may be alternately engaged or disengaged by pressing and holding the VS key
on the PFD bezel.
22
Flight Director Bars Showing Aircraft Pitch
Engage/Disengage VS Bug
G500/G600 Cockpit Reference Guide
SVT On
190-00601-03 Rev H