Garmin G500 Reference Manual page 20

Avionics display systems
Hide thumbs Also See for G500:
Table of Contents

Advertisement

PRIMARY FLIGHT DISPLAY (PFD)
To set the altitude for the Minimums Bug:
1) While viewing the Active Flight Plan page of the FPL Group, press the small
MFD knob to activate the cursor and turn the large MFD knob to the Source
selection.
2) Turn the small MFD knob to select Off, BARO, or RAD ALT.
3) Turn the large MFD knob to the ALTITUDE portion of the MINIMUMS section.
4) Turn the small MFD knob to enter the desired altitude. Press the ENT key to
confirm selection.
5) When finished, press the small MFD knob to exit the MINIMUMS box.
The Minimums Bug can also be set from the Charts page of the FPL.
1) While viewing the Charts page of the FPL Group, press the MENU key and
select "Set Minimums" from the Options menu.
2) Turn the small MFD knob to select Off, BARO, or RAD ALT.
3) Press the ENT key to move to enter altitude. Turn the small MFD knob to
enter the desired altitude. Press the ENT key to confirm selection.
8
G500/G600 Cockpit Reference Guide
190-00601-03 Rev H

Advertisement

Table of Contents
loading

This manual is also suitable for:

G600

Table of Contents