Stihl HL-KM Instruction Manual page 9

English
Swing the cutter bar in an arc towards
the outside of the hedge so that the
cuttings are swept to the ground.
Recommendation: Only cut hedges that
are no more than chest height.
8
Only use KombiEngines supplied by
STIHL or expressly approved by STIHL
for use with the KombiTool.
This KombiTool may be operated only in
combination with the following
KombiEngines:
STIHL KM 55, KM 55 R, KM56R,
KM 85, KM 85 R, KM 90, KM 90 R,
KM 100, KM 100 R, KM 110, KM 110 R,
KM
130,
KM
130
R
Ii\
Loop-handled machines must be
~
equipped with a barrier bar.
A The HL-KM 0' is not approved for
ili
use on KombiEngines with a bike
handle.
This KombiTool may also be mounted to
STIHL brushcutters with a split drive
tube (T models).
Operation of this KombiTool is therefore
also permitted on the following power
tool models:
STIHL FS 55 T, FS 55 RT, FS 85 T,
FS 85 RT, FR 85 T and FR
130
T
Ii\
Loop-handled machines must be
~equipped
with a barrier bar.
• Pull the protective caps off the ends
of the drive tube and keep them in a
safe place for later use - see .
"Storing the Machine" ..
...
t]
,
1~IThe plug may come out oithe
~ drive tube when you pull off the
cap. Push it back into the drive
tube as far as stop.
z
•
•
~
§
HL-KM