Mounting the Gearbox
•
•
3
Loosen the clamp screws (1) .
Push the gearbox (2) onto the drive
tube (3), turn the gearbox (2) back
and forth as necessary.
HL-KM
4
Once the end of the drive tube is
inserted beyond the slot in the clamp (4):
•
Push the gearbox (2) fully home as
far as stop.
•
Tighten down the clamp screws
moderately.
•
Line up the gearbox (2) on the drive
tube so that the machine support on
the engine paints down and the
blades are horizontal.
•
Tighten down the clamp screws
firmly.
English
•
Push the lug (1) on the drive tube
into the slot (2) in the coupling
sleeve as far as stop.
4
When correctly installed, the red line (3)
(arrow point) must be flush with the end
of the coupling sleeve.
•
Tighten down the wing screw (4)
firmly.
Removing the KombiTool
•
Reverse the above sequence to
removelhe<lrivetube., .
9