Stihl HL-KM Instruction Manual page 15

English
For periods of 3 months or longer
• Clean the cutting blades, check
condition and spray them with
STIHL resin solvent.
• Fit the blade scabbard.
• If the KombiTool is removed from
the KombiEngine and stored
separately: Fit the protective cap on
the drive tube to avoid dirt getting
into the coupling.
• Store the machine in a dry, high or
locked location - out of the reach of
children and other unauthorized
persons.
14
The following intervals apply to normal
operating conditions only. If your daily
working time is longer or operating
conditions are difficult (very dusty work
area, etc.), shorten the specified
intervals accordingly.
All accessible screws and nuts
• Check and retighten if necessary
(not screws and nuts on cutting
blades)
Cutting blades
• Visual inspection before starting
work
• Resharpen as necessary
• Replace if damaged
Gearbox lubrication
• Check before starting work
• Replenish as necessary
Safety labels
• Replace illegible safety labels
When cutting performance and behavior
begin to deteriorate, i.e. blades
frequently snag on branches:
Resharpen the cutting blades.
It is best to have the cutting blades
resharpened by a dealer on a workshop
sharpener. STIHL recommends a STIHL
servicing dealer.
I
~
I
Do not operate your machine with
..:,<
dull or damaged cutting blades.
This may cause overload and will
give unsatisfactory cutting results.
' } :1\f'
I