Stihl HL-KM Instruction Manual page 12

• Shut off the engine.
• Fit the blade scabbard.
• Pull back the sliding sleeve (1) and
use the lever (2) to swing the jOint
upwards - in direction of drive tube
- until the cutter bar is fiat against
the drive tube.
.• Release the sliding sleeve (1) and
make sure the lock pin engages the
quadrant (3).
The sliding sleeve butts against the
housing when the pin is properly
engaged (after making adjustment).
The harness is available as a special
accessory.
The type and style of the harness and
carabiner (spring hook) depend on the
market.
Shoulder strap
• Put on the shoulder strap (1).
• Adjust the length of the strap - with
the machine attached, the
"' ", ..
"acn"I~'m",,"I1I""O*<""'fl'.llfilllirer
(2) must be athab
h
" out the
" "... same nelght as your rrg tip.
HL-KM
English
Full harness
• Put on the fulHharness (1).
• Adjust the length of the strap - with
the machine attached, the
carabiner (2) must be at about the
same height as your right hip.
Throwing off the machine In an
emergency
l'
The machine and harness must
L l l be quickly thrown off in an
emergency. The buckle (3) has to
be opened fi rst.
Attaching
the unit
to the harness .
"·c.,,,,;
On som.e)99P-handled machines the "'%i\i~!:I;'
carrying'fing',s integrated in the front"
end of the control handle.
11