Removal And Adjustment - Ricoh FAX220 Service Manual

4. REMOVAL AND ADJUSTMENT

1.Unplug the machine from the power outlet before removing any of the covers.
2. The danger of explosion exists if the lithium battery on the FDU is incorrectly replaced. Replace
only with the same or an equivalent type recommended by the manufacturer. Discard used batteries
4-1. COVERS
4-1-1. Operation Panel Assembly
1. Open the ADF.
2. Remove the operation panel cover [A] as shown below.
3. Disconnect three connectors.
4. Remove the lower cover [B] (1 ground wire).
CAUTION
in accordance with the manufacturer's instructions.
[B]
4-1
[A]