Leaving The Range Of The Transmitter - Sennheiser Flex 5000 Instruction Manual

Digital wireless audio system for headphones

Hide thumbs Also See for Flex 5000:

Safety manual (66 pages)

Manual (19 pages)

Table Of Contents

Table of Contents

Problem

Possible cause

The operating

The rechargeable battery is

time decreases

exhausted.

The hearing profile and balance

A hearing profile

protection is activated.

or the balance

cannot be

More than one receiver is currently

activated or

connected to the transmitter.

changed

The receiver is not paired with the

transmitter.

The receiver

The distance to the transmitter is

does not connect

too large.

to the

transmitter

4 receivers are currently connected

to the transmitter.

If a problem occurs that is not listed in the above table or if the problem cannot be solved with the

proposed solutions, visit the Flex 5000 product page at www.sennheiser.com for the most up-to-date

list of frequently asked questions.

You may also contact your local Sennheiser partner for assistance. To find a Sennheiser partner in your

country, search at www.sennheiser.com.

Possible solution

Have the rechargeable battery

replaced by an authorized Sennheiser

service partner.

Deactivate the hearing profile and

balance protection.

This function is only possible when

only one stethoset receiver/receiver is

connected to the transmitter.

Pair the receiver with the transmitter. 27

Reduce the distance between the

receiver and the transmitter.

Up to 4 stethoset receivers/receivers

can be simultaneously used with the

transmitter.