Using The Flex 5000; Connecting Headphones Or An Induction Loop To The Receiver - Sennheiser Flex 5000 Instruction Manual

Using the Flex 5000

18 | Flex 5000
Using the Flex 5000
Connecting headphones or an induction loop to the
receiver
You can connect any headphones or induction loop for hearing aids
with a 3.5 mm jack plug to the RR Flex receiver.
Connecting headphones
We recommend using closed headphones or earphones/ear canal
phones to avoid echoes from e.g. the TV loudspeaker.
Connect the 3.5 mm jack plug of the headphones (e.g. MX 475,
supplied) to the jack socket of the receiver.
Connecting an induction loop for hearing aids
You can only use an induction loop if you hearing aid supports an
induction coil (T-coil).
Connect the 3.5 mm jack plug of the induction loop (e.g.
Sennheiser EZT 3012, optional accessory) to the jack socket of
the receiver.
Set your hearing aid to position "T".
If your hearing aid has no position "T" or if you want to use
another connection possibility for your hearing aid or cochlea
implant, please contact your hearing aid acoustician.
optional accessory