Connecting The Transmitter To An Audio Source - Sennheiser Flex 5000 Instruction Manual

Connection possibilities of
the audio source
A Optical (digital)
3.5 mm jack socket
B
(analog)
RCA (analog)
C
SCART (analog)
D

Connecting the transmitter to an audio source

You can connect the transmitter either to a digital or an analog
audio source (e.g. a TV and a stereo hi-fi system).
If you connect an audio source to
only the analog audio source will be reproduced.
You can also refer to the beginner's video guides on how to
connect your digital wireless headphone system to a TV:
www.sennheiser.com/how-to-videos.
Switch your audio sources off before connecting the transmitter.
Check the connection possibilities of your audio source (audio
output, usually marked "OUT").
Select the corresponding connection cable and, if necessary, a
suitable adapter
To connect the transmitter to your audio source, refer to the con-
nection diagram suitable for your audio source (see the follow-
ing chapters). Follow the color codings on the transmitter and on
the cables.
Color coding
on the Connection cable
transmitter
Optical digital cable
Stereo audio cable
Stereo audio cable with RCA adapter
(3.5 mm jack socket to 2 RCA plugs;
optional accessory)
Stereo audio cable with SCART
adapter (3.5 mm jack socket to
SCART connector; optional
accessory)
Accessories and adapters are available from your local Senn-
heiser partner.
Putting the Flex 5000 into operation
both inputs (digital and analog),
Flex 5000
Page
12
13
14
14
| 11