Charging The Receiver's Rechargeable Battery - Sennheiser Flex 5000 Instruction Manual

Putting the Flex 5000 into operation
Battery LED
16 | Flex 5000

Charging the receiver's rechargeable battery

A complete charging cycle takes about 3 hours. Before using the
3 h
receiver for the first time, charge its rechargeable battery for a com-
plete charging cycle without interruption.
When the rechargeable battery is almost empty, the
100
%
LED lights up red and you hear 2 beeps via the receiver. The
LED on the transmitter lights up white. The receiver switches off
after a few minutes.
Place the receiver into the transmitter's charging compartment
so that the volume buttons face upwards. The receiver is mag-
netically oriented to the correct position. The receiver automati-
cally switches off and the
lights up white. The LED segments display the charge status of
the rechargeable battery. When the rechargeable battery is fully
charged, all LED segments light up white.
–
st
1 LED segment flashes
st
1 LED segment lit
nd
2 LED segment flashes
st nd
1 + 2 LED segments lit
rd
3 LED segment flashes
All LED segments lit
Battery LED flashes
rapidly
Receiver status
Battery
LED on the transmitter
Meaning
The transmitter is not charging.
The rechargeable battery is being
charged. Less than one-third of the
charge capacity is reached.
The rechargeable battery is being
charged. Up to one-third of the
charge capacity is reached.
The rechargeable battery is being
charged. Up to two-thirds of the
charge capacity is reached.
The rechargeable battery is fully
charged.
A charging error/battery error has
occurred (see page 26).
Battery
3 h
100
%