Outdoor Cisco Aironet Dual-Band Omnidirectional Antenna And Access Point For Indoor Use Scenario; Indoor Cisco Aironet Dual-Band Omnidirectional Antenna Directly And Cable Connected To Access Point - Cisco IW3702 Getting Started Manual

Cisco IW3702 Access Point Getting Started Guide
Antennas

Outdoor Cisco Aironet Dual-Band Omnidirectional Antenna and Access Point for Indoor Use Scenario

Table 5 Outdoor Dual-Band Omnidirectional Antenna and Access Point for Indoor Use Scenario
Item Description
Antenna 4 x Cisco Aironet dual-band omnidirectional antennas mounted remotely outdoors, with the access
Arrangement point indoors or enclosed.
Access Point IW3702-4E-UXK9 or IW3702-2E-UXK9
Adapter and/or You need:
Lightning Arrestor


Internal Cable —
External Cable Select from:


Antenna 4 x Cisco Aironet dual-band omnidirectional antennas are required. The antenna specification is:




Select from:


Note:

Indoor Cisco Aironet Dual-Band Omnidirectional Antenna Directly and Cable Connected to Access Point

Table 6 Indoor Dual-Band Omnidirectional Antenna Directly and Cable Connected to Access Point
Item
Antenna
Arrangement
Access Point
Adapter and/or
Lightning Arrestor
4 x DC pass, N(f)-N(f) lightning arrestors. Cisco PID CGR-LA-NF-NF, Cisco PN 07-1158-02.
4 x N(f) to N(f) RF-adapters. Cisco PID AIR-ACC370-NF-NF, Cisco PN 29-100818-01.
4 x RA-N(m) to N(m), LMR-400-DB, 20 ft. cables. Cisco PID CAB-L400-20-N-N,
Cisco PN 37-1392-01
4 x RA-N(m) to N(m), LMR-600-DB, 30 ft. cables. Cisco PID CAB-L600-30-N-N,
Cisco PN 37-1396-01
2400-2484MHz, 5150-5875MHz, dual-band, WiFi, operating frequency range
4 dBi (2.4 GHz), 7 dBi (5 GHz) gain
11 in. (27.94 cm) stick antennas for indoor or outdoor use with a type N(m) connector
IP67 rated, -40 to 185°F (-40°C to 85°C) operating temperature range
White model, Cisco PID AIR-ANT2547V-N=
Grey Model, Cisco PID AIR-ANT2547VG-N=
To mast-mount the antenna, you must purchase a mast-mount U-bolt bracket from a third party.
Description
4 x indoor Cisco Aironet dual-band omnidirectional antennas connected to the
IW3702-2E-UXK9 model:

2 x antennas directly mounted on top panel side.

2 x antennas connected via internal cables on the bottom side.
IW3702-2E-UXK9 only
You need:

2 x N(f) to N(f) RF adapters. Cisco PID AIR-ACC370-NF-NF, Cisco PN 29-100818-01.
Note: No lightning arrestors are required.
22