Cisco Aironet Dual-Band Omnidirectional Antenna - Cisco Aironet 1550 Series Hardware Installation Manual

Chapter 1 Overview
Figure 1-8
1
2

Cisco Aironet Dual-Band Omnidirectional Antenna

The Dual-Band Omnidirectional Antenna is designed for outdoor use with Cisco Aironet Outdoor
Access Points with radios operating in the 2.4-GHz and 5-GHz frequency bands
operating features of the antenna are:
•
•
•
The antenna is designed to create an omnidirectional broadcast pattern. To achieve this pattern, mount
the access point clear of any obstructions to the sides of the radiating element.
For detailed information on this antenna, refer to the Cisco Aironet Dual-Band Omnidirectional Antenna
(AIR-ANT2547V-N) document. Follow all safety precautions when installing the antennas, for
information on safety refer to
OL-24247-01
Cisco Aironet Low Profile Dual-Band 2.4/5 GHz Omni Antenna Array- Built-in Only on
Models AIR-CAP1552I-x-K9 and AIR-CAP1552C-x-K9
2
Integrated Low Profile Dual-Band 2.4/5
GHz Omni Antenna Array Unit - PID
AIR-ANT2547V-N
Antenna element (RX only)
Omnidirectional colinear array
Operates in the 2.4 GHz and 5 GHz frequency bands
Gain:
– 2400–2483 MHz — 4-dBi
– 5250–5875 MHz — 7-dBi
"Safety Precautions" section on page
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
4
1
3
3 Antenna element (TX/RX)
4 Antenna element (TX/RX)
Hardware Features
(Figure 1-9). Basic
1-14.
1-13