Technical Specifications; Power Specifications - Cisco IW3702 Getting Started Manual

Cisco IW3702 Access Point Getting Started Guide

Technical Specifications

Technical Specifications
This section provides the following technical specifications for the access point:

Environmental and Operational Specifications, page 40

Power Specifications, page 40

Mechanical Specifications, page 42

Regulatory Compliance and Safety Information, page 42

Declaration of Conformity for RF Exposure, page 42

Declaration of Conformity Statements, page 48
Environmental and Operational Specifications
Table 14 Environmental and Operating Specifications for the Access Point
Description
Operating temperature
Altitude
Humidity
Extended operating temperature
(DC power)
Operating type test
Storage temperature
Vibration
Shock
Seismic

Power Specifications


Power Requirements, page 41

DC Input and PoE IN Specifications, page 41
Specification
–40 to 158°F (–40 to +70°C) with solar load and still air
15,000 ft. (4.5 m)
5 to 95% (non-condensing)
–58 to 167°F (–50 to +75°C) without solar loading, still air, and cold start limited
to –40°C
185°F (85°C) for 16 hours
–40 to 185°F (–40 to +85°C)
Per IEEE 1613, IEC 61850, EN50155, and AREMA
Per IEEE 1613, IEC 61850, EN50155, and AREMA
Per IEC 61850-3 Class 2
40