Adjustment - Kenwood NX-210(G) Service Manual

NX-210(G)
Controls
Selector
Side1 key
PTT switch
Side2 key
38
TROUBLE SHOOTING
(Not used)
NXDN ESN Label (12 digits)
Kenwood ESN Label
(Not used)
(Not used)

ADJUSTMENT

Orange key
Power switch / Volume
Universal
connector
NXDN ESN Label (12 digits)
KENWOOD ESN Label
Cut-off Line
Note:
A UPC code and UPC barcode is not printed on the Ken-
wood ESN Label. If necessary, cut the label at the cut-off
line and attach only the serial number.
Panel Test Mode
■ Test mode operation features
This transceiver has a test mode. To enter test mode,
press and hold the [ ] key while turning the transceiver
power ON. Before the transceiver enters test mode, the
frequency version information appears on the LCD mo-
mentarily. Test mode can be inhibited by programming. To
exit test mode, turn the transceiver power OFF. The follow-
ing functions are available in test mode.