Adjustment - Kenwood TK-7189 Service Manual
Vhf fm transceiver, uhf fm transceiver
Hide thumbs
Also See for TK-7189:
- Instruction manual (196 pages) ,
- Service manual (91 pages) ,
- Manual de instrucciones (32 pages)
Advertisement
TK-7180/7189/7180H/8180/8189/8180H
Controls
Power
Volume
switch
Up/Down key
Modular
Programmable
MIC jack
function keys
Panel Test Mode
■ Test mode operation features
This transceiver has a test mode. To enter test mode,
press and hold the [A] key while turning the transceiver
power ON. Before the transceiver enters test mode, the
frequency version information appears on the LCD mo-
mentarily. Test mode can be inhibited by programming. To
exit test mode, turn the transceiver power OFF. The follow-
ing functions are available in test mode.
■ Key operation
Key
Function
[S]
Shifts to Panel tuning mode
[A]
Function on
[B]
MSK 1200bps and 2400bps
[C]
Test signaling CH up
[ ]/[ ]
Test frequency CH up/down
[ ]/[ ]
Volume up/down
[
]
Squelch on/off
[■ ]
Narrow/Wide
[0] to [9]
Use as the DTMF keypad.
and [#],
If a key is pressed during
[
] *1
transmission, the DTMF
*
corresponding to the key
that was presses is sent.
Microphone key
[PTT]
Transmit
[0] to [9]
Use as the DTMF keypad.
and [A],
If a key is pressed during
[B], [C],
transmission, the DTMF
[D], [#],
corresponding to the key
[
]
that was presses is sent.
*
*1 : TK-7189 and TK-8189 models only
12
ADJUSTMENT
Channel
LCD
Up/Down key
"FNC" not appears
Display
-
"FNC" appears
2400bps :
icon appears
Signaling No.
Channel No.
-
Narrow : "n"
Wide : "w"
-
-
-
Key
Function
[S]
High power / Low power
[A]
Function off
[B]
Compander on/off
[C]
Beat shift on/off
[ ]/[ ]
Function off
[ ]/[ ]
Function off
[
]
Squelch level 0
[■ ]
LCD all lights
[0] to [9]
Function off
and [#],
[
] *2
*
Microphone key
[PTT]
Transmit
[0] to [9]
Function off
and [A],
[B], [C],
[D], [#],
[
]
*
*2 : TK-7189 and TK-8189 models only
Note:
If a [S], [A], [B], [C] key is pressed during transmission, the
DTMF corresponding to the key that was pressed is sent.
• LED indicator
Red LED
Lights during transmission.
Green LED
Lights when there is carrier.
• Sub LCD indicator
"FNC"
Appears at function on.
• LCD display in panel test mode
n
1
n : Narrow
Channel No.
w : Wide
"FNC" appears
Display
Low :
icon appears
-
On :
icon appears
On :
icon appears
-
-
On :
icon appears
LCD all point appears
-
-
-
–
1
Signaling No.
Advertisement
